Stand: 15.09.2024
Upholstery

Self Piercing Rivets 

  /   Use only with  Special Tools
Steel Self Piercing Rivets are self cutting and do not require pre-punched holes. They come without a bottom piece and with special setting tools they spread clean and even on the underside of the material. By soft materials such as garments or upholstery, a cap or washer on the bottom side is recommended and available.
Price incl.19% Vat

Self Piercing Rivets, Flat Head Rivets

  New economoc products		PackPackPack
ImageDescriptionDetailedColorItem No. €/100St.€/1000St.€/5000St.
Self Piercing Rivet
Flat Head Rivet
Head Ø 7,0 mm, Shaft Ø 4,0 mm		Shaft length 6,0 mmnickel615900,030,020,01
Shaft length 6,0 mmbrass615950,030,020,01
Shaft length 8,0 mmnickel616000,040,030,02
Shaft length 8,0 mmbrass616050,050,030,02
Shaft length 10,0 mmnickel616100,040,030,02
Shaft length 10,0 mmbrass616150,040,020,02
Self Piercing Rivet
Flat Head Rivet
Head Ø 9,0 mm, Shaft Ø 4,0 mm		Shaft length 8,0 mmnickel616700,050,030,02
Shaft length 8,0 mmbrass61675----------0,02
Self Piercing Rivet
Flat Head Rivet
Head Ø 11,0 mm, Shaft Ø 4,0 mm		Shaft length 8,0 mmnickel616900,050,030,02
Shaft length 8,0 mmbrass616950,050,030,02
Shaft length 10,0 mmnickel617000,050,030,02
Shaft length 10,0 mmbrass617050,060,030,02
Bottom Cap
massive Material		Ø 7.7 x 2.0 mmnickel617400,030,020,01
Ø 7.7 x 2.0 mmbrass617450,030,020,01

Rivet Pattern from the bottom side
rounded
Cap
Lederhaus Giese GmbH,   Sonnenwall 69,   47051 Duisburg,   Germany
Tel. : +49 203 518860-0  |  E-Mail: info@leatherhouse.com  |  Internet: www.Leatherhouse.com